Part# PR-414 - Crow Cams push rods to suit a Ford 302 or 351 Cleveland Engine. Standard length + 0.015" at 8.423" inches long. Hardened - will suit heads with pushrod guide plates installed.
These pushrods beeing a bit longer than stock, give you a bit more lifter pre-load if you are retaining the original non adjustable pressed steel rockers arms. Ideal if you find your engine is a bit clicky with tappet noise, it maybe enough to quieten it down by taking up the valve lash.
IMPORTANT NOTE: Please ensure you select the right length push rod for your engine. You can usually find the dimension in your engines' workshop manual specifications. Failing that you can measure them. KustomBitz will change over pushrods if you order the wrong length however it will cost you a 35% restocking fee plus the additional cost in shipping.